Project: SpiritOfMudsuck   -  
            Listing of Entries
    (Please mouse-over any icon to get a description of that function).



Categories
  
Builder Name:Pete Dailey   -  
Project:   Sonex - Xenos-B Motorglider   -   VIEW REPORTS
Total Hours:1506.3
Total Flight Time:
Total Expense:$75148.03
Start/Last Date:Jul 01, 2016 - No Finish Date
Engine:Aerovee 2.1 Turbo
Propeller:Sensenich
Panel:MGL Avionics Explorer iEFIS/ECB/RDAC
 
Friendly URL: https://eaabuilderslog.org?s=SpiritOfMudsuck

Home or Last Project Picture

Oct 26, 2019     Glare Shield Prep - (1.1 hours)       Category: Cockpit
To prepare the cockpit for glare shield/fuel tank, the Peter Anson (http://www.ansoneng.com/sample-page/products-summary/fresh_air_intake/) air vents were removed. One vent had broken the 3D printed mount holding the open/close nut. Removed center control stick to provide room for the fuel cell.Drilled out port side rivets on glare shield angle, as riveting the glare shield with the angle attached to the firewall doesn't permit riveting the glare shield to the angle. Will rivet angle to glare shield and then rivet the angle to the firewall.

gallery thumbnail



 


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.